NEO-M8T GNSS FeatherWing
Here’s another interesting M8T based hardware project. This one is a clone of the Adafruit Ultimate GPS FeatherWing but with the u-blox NEO-M8T replacing the GlobalTop FGPMMOPA6H.
Exploring moving-base solutions
As you might guess from the name, a moving-base solution differs from the more common fixed-based solutions in that the base station is allowed to move in addition to the rover. Although it could be…
Demo5 code features
I’ve had a couple questions about what’s different between my demo5 code and the 2.4.3 release code. Here’s a list of what I think are the significant differences. Any changes that I have made but…
Installing u-blox USB drivers on Windows
Installing the u-blox USB drivers for Windows for use with RTKLIB can be a little tricky now that u-blox has switched their default Windows configuration from using COM port drivers to using sensor device drivers. …
Another Raspberry Pi RTKLIB project
After describing my simple Pi based data logger in my last post, I stumbled across this Raspberry Pi based GPS project on diydrones.com. It uses an M8T receiver and includes a touchscreen GUI to manage…
Improving RTKLIB solution: (AR lock count and elevation mask)
In the previous post, after a couple changes to the input parameters, we ended up with the following solution for the difference between two stationary, then moving Ublox receivers: During the time when the receivers…
Plotting Observation Data: Cycle Slips
Recently, I have been given several raw data sets from readers to take a look at. Some of them I have been successful at improving the results and some of them I haven’t. In…
Building RTKLIB 2.4.3 code with Visual C++ 2010
One of my goals in this project is to make some changes to the RTKLIB solution algorithms and evaluate them specifically for my set of inputs. RTKLIB is intended to work in many different environments.…
Kinematic solution with RTKPOST
Kinematic solution with RTKPOST RTKPOST is the GUI tool in RTKLIB to calculate position solutions. Most of the time I find the CUI version (RNX2RTKP) better fits my needs, but just to check everything is…
Kinematic solution with RNX2RTKP
In the last post we used the RTKPOST GUI to generate a kinematic position solution using “ebay.obs” for the rover data and “zdv13480.15o” for the base station data. To do the equivalent run from…